[1]向 星,邓 军*,陈 藜,等.旋流竖井中部消能水垫数值模拟分析研究[J].江苏水利,2017,(12):54-57.
 XIANG Xing,DENG Jun,CHEN Li,et al.Numerical simulation analysis on the energy dissipation water cushion in the middle part of gyrating shaft well[J].JIANGSU WATER RESOURCES,2017,(12):54-57.
点击复制

旋流竖井中部消能水垫数值模拟分析研究()
分享到:

《江苏水利》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2017年12期
页码:
54-57
栏目:
工程建设
出版日期:
2018-01-05

文章信息/Info

Title:
Numerical simulation analysis on the energy dissipation water cushion in the middle part of gyrating shaft well
文章编号:
1007-7839(2017)12-0054-04
作者:
向 星邓 军*陈 藜陈鑫淼
四川大学水利水电学院,四川 成都 610065
Author(s):
XIANG XingDENG JunCHEN LiCHEN Xinmiao
College of Water Resource & Hydropower,Sichuan University,Chengdu 610065,Sichuan
关键词:
数值模拟旋流竖井消能水垫消能效果
Keywords:
numerical simulationgyrating shaft wellenergy dissipation water cushionenergy dissipation effect
分类号:
TV735
文献标志码:
B
摘要:
采用数值模拟的方法,以现阶段实际工程应用中,最大流量竖井旋流泄洪洞为研究对象,对竖井中部形成的消能水垫进行分析研究,得到结论:在流量667 m3/s 时,收缩面直径为6.6 m、上收缩角为20°,竖井中部成功形成预想的消能水垫;相同工况下,在消能水垫装置上方,及其下方一定范围内,高程相同的位置,设置消能水垫后水流的壁面流速均小于不设置消能水垫时的壁面流速,即消能水垫装置起到了一定的消能效果。
Abstract:
Taking the maximum flow gyrating shaft well tunnel spillway in the practical application at present as a research object, the energy dissipation water cushion formed in the middle part of gyrating shaft well was analyzed by using the method of numerical simulation.The conclusion was drawn: when the flow rate was 667m3/s,the diameter of the contraction surface was 6.6 meter, the upper shrinkage angle is 20°, and the expected energy dissipation water cushion was successfully formed in the middle part of the shaft.Under the same conditions, above and below a certain range of the energy dissipation water cushion device, at the same elevation, the wall velocity of flow after setting energy dissipation water cushion were lower than the wall velocity when the energy dissipation water cushion was not set.That is, the energy dissipation device did have a certain energy dissipation effect.

参考文献/References:

[1] 刘永良.竖井旋流内消能技术在辽宁恒仁水电站的应用[J].中国水能及电气化,2016(12):42-44.
[2] 林崇勇.竖井旋流泄洪洞在甲岩水电站的应用[J].云南水力发电,2013(5):26-28.
[3] 王超,陈立秋,陈俊杰.竖井旋流内消能技术在双沟水电站的应用[J].东北水利水电,2015,33(8):1-3.
[4] 郭琰,倪汉根.旋流式竖井溢洪道竖井的水流特性研究[J].水动力学研究与进展,1995(2):146-154.
[5] 邓军,田忠,张法星,等.一种适用于高水头的多级水垫旋流竖井泄洪洞:CN 103758093 A[P].2014.
[6] 杨朝晖,吴守荣,余挺,等.竖井旋流泄洪洞三维数值模拟研究[J].四川大学学报(工程科学版),2007,39(2):41-46.
[7] 张晓东,刘之平,高季章,等.竖井旋流式泄洪洞数值模拟[J].水利学报,2003,34(8):58-63.
[8] 陈华勇,邓军,胡静,等.旋流式竖井泄洪洞水力要素的数值模拟与试验研究[J].水力发电,2008,34(3):79-82.
[9] 钱小燕,邓军,张叶林,等.竖井旋流泄洪洞涡室整流挑坎试验与数值模拟[J].人民长江,2011,42(11):20-22.

相似文献/References:

[1]薛士平,杨晓红,吴佩锋.泵站弯道引水渠水流流动特性影响分析[J].江苏水利,2017,(01):9.
 XUE Shiping,YANG Xiaohong,WU Peifeng.Analysis of the flow characteristics influence in the bend channel of pump station[J].JIANGSU WATER RESOURCES,2017,(12):9.
[2]丁 辉.低扬程双向立式轴流泵装置水力优化研究[J].江苏水利,2017,(01):17.
 DING Hui.Study on optimization of low-lift bidirectional vertical axial flow pumping device[J].JIANGSU WATER RESOURCES,2017,(12):17.
[3]顾春雨,薛士平,杨晓红.泵站锥形侧向进水前池水流流动特性分析[J].江苏水利,2017,(02):17.
 GU Chunyu,XUE Shiping,YANG Xiaohong.Analysis of the flow characteristics in the conical forebay wit h side-intake of the pump station[J].JIANGSU WATER RESOURCES,2017,(12):17.
[4]戴 景,戴启璠.刘老涧一站具有发电功能泵装置选型研究[J].江苏水利,2017,(03):46.
 DAI Jing,DAI Qifan.Study on the selection of pump device with power function of Li ulaojian station[J].JIANGSU WATER RESOURCES,2017,(12):46.
[5]吴晓兰,马晓辉,许一新.泵站正向进水前池水流流动均匀性分析[J].江苏水利,2017,(03):53.
 WU Xiaolan,MA Xiaohui,XU Yixin.Analysis of flow uniformity of front inflow forebay in the pump station[J].JIANGSU WATER RESOURCES,2017,(12):53.
[6]周 杨,吴东恒,顾春雨,等.城镇泵站侧向进水间隔墩与圆柱结合水流流态分析[J].江苏水利,2017,(05):20.
 ZHOU Yang,WU Dongheng,GU Chunyu,et al.Analysis of flow pattern in the lateral inlet of urban pumping station[J].JIANGSU WATER RESOURCES,2017,(12):20.
[7]戴 景,戴启璠,郭赞赞,等.参数化选型方法在泗阳二站水泵选型中的应用[J].江苏水利,2017,(08):29.
 DAI Jing,DAI Qifan,GUO Zanzan,et al.Application of parametric selection method in pump selection of Siyang second station[J].JIANGSU WATER RESOURCES,2017,(12):29.
[8]吴东恒,顾春雨,杨晓红,等.多机组泵站复合前池水流流动数值模拟研究[J].江苏水利,2017,(08):48.
 WU Dongheng,GU Chunyu,YANG Xiaohong,et al.Numerical simulation on the water flow in the compound forebay of multi-unit pumping station[J].JIANGSU WATER RESOURCES,2017,(12):48.
[9]顾 巍,成 立*,蒋红樱,等.立式轴流泵装置虹吸式出水流道水力特性CFD 研究[J].江苏水利,2018,(01):7.
 GU Wei,CHENG Li*,JIANG Hongying,et al.CFD study on the hydraulic characteristics of siphon outlet conduit of vertical axial flow pump[J].JIANGSU WATER RESOURCES,2018,(12):7.
[10]蒋红樱,李尚红,顾 巍,等.九曲河泵站流动特性数值模拟分析[J].江苏水利,2018,(03):1.
 JIANG Hongying,LI Shanghong,GU Wei,et al.Numerical simulation analysis of flow characteristics of Jiuqu River Pumping Station[J].JIANGSU WATER RESOURCES,2018,(12):1.

备注/Memo

备注/Memo:
收稿日期:2017-08-12
作者简介:向星(1996-),男,本科生,研究方向为水工水力学。
通讯作者:邓军(1973-),男,教授,研究方向为水工水力学。
更新日期/Last Update: 2017-12-15