[1]丁 辉.低扬程双向立式轴流泵装置水力优化研究[J].江苏水利,2017,(01):17-21,26.
　DING Hui.Study on optimization of low-lift bidirectional vertical axial flow pumping device[J].JIANGSU WATER RESOURCES,2017,(01):17-21,26.
点击复制

低扬程双向立式轴流泵装置水力优化研究()
分享到：

《江苏水利》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2017年01期
页码:
17-21,26
栏目:
规划与设计
出版日期:
2017-02-28

文章信息/Info

Title:
Study on optimization of low-lift bidirectional vertical axial flow pumping device
文章编号:
1007-7839（2017）01-0017-05
作者:
丁 辉
滨海县八巨水利管理服务站，江苏 盐城 224542
Author(s):
DING Hui
Baju water manage service station of Binhai，Yancheng 224542，Jiangsu
关键词:
泵装置; 水力损失; 效率; 优化; 数值模拟
Keywords:
pump device; hydraulic loss; efficiency; optimization; numerical simulation
分类号:
TV675
文献标志码:
B
摘要:
苏南某泵站是双向立式轴流泵，在该泵站机组结构改造之后，利用CFD 软件建立该泵站的泵装置三维模型，并进行数值模拟计算，得到水力性能参数值。将现场测试结果与数值模拟结果相比较，表明数值模拟的结果与现场测试的结果较为吻合，设计工况下，效率的误差为±1.25%，说明数值模拟方法具备较高精度，其结果具备较高可靠性。在结构改造的基础上，利用数值模拟方法对泵装置进行了局部结构优化：通过改变该泵站泵装置的轮毂比，使泵装置的效率提高了1.44%，通过改变叶轮叶片出口边与导叶进口边的距离，使导叶出口的水力损失得到改善，优化后泵装置具备较好的水力性能。
Abstract:
After a certain bidirectional vertical axial flow pump unit structure in south of Jiangsu be reconstructed,CFD software is used to establish the three-dimensional model.The numerical simulation was carried out to obtain the parameters of the hydraulic performance.By comparing the results of field test and numerical simulation，it shows that the two results are consistent.Under the design conditions ,the error of efficiency is ±1.25%，which indicate that the numerical simulation results are reliable.By changing the pump unit hub ratio，the efficiency of the pump device is increased by 1.44%.By changing the distance between outlet edge of impeller blade and the inlet edge of guide vane，the hydraulic loss at the outlet of the guide vane is improved.The optimized pump device has better hydraulic performance.

参考文献/References:

[1]熊小琴，胡魁德．抚河流域水文特性分析[J]．江西水利科技，2004，30（2）：105-110.
[2]刘健，张奇，许祟育，等．近50 年鄱阳湖流域径流变化特征研究[J].热带地理，2009，29（3）：213-224.
[3]罗蔚，张翔，邹大胜，等．鄱阳湖流域抚河径流特征及变化趋势分析[J].水文，2012，32（3）：75-82.
[4]曹洁萍，迟道才，等．Mann-Kendall 检验方法在降水趋势分析中的应用研究[J].农业科技与装备，2008（5）：35-37.

相似文献/References:

[1]孙丹丹,陈世杰,王 斌,等.江苏古邳泵站混流泵装置模型试验[J].江苏水利,2017,(06):32.
　SUN Dandan,CHEN Shijie,WANG Bin,et al.Model test of mixed flow pump unit for Gupi pumping station in Jiangsu[J].JIANGSU WATER RESOURCES,2017,(01):32.
[2]戴启璠.大型低扬程泵装置现状及发展方向[J].江苏水利,2018,(06):54.
　DAI Qifan.Current situation and development direction of large-scale low-lift pumping station device[J].JIANGSU WATER RESOURCES,2018,(01):54.
[3]孙丹丹,高 慧,王 刚,等.立式轴流泵装置进出水流道多方案优选[J].江苏水利,2018,(11):35.
　SUN Dandan,GAO Hui,WANG Gang,et al.Multiple schemes optimization for inlet and outlet flow of vertical axial flow pump device[J].JIANGSU WATER RESOURCES,2018,(01):35.
[4]李 超,袁 尧,单陆丹,等.贯流泵模型装置能量特性相关试验分析[J].江苏水利,2020,(08):42.
　LI Chao,YUAN Yao,SHAN Ludan,et al.Experimental analysis of energy characteristics of tubular pump model unit[J].JIANGSU WATER RESOURCES,2020,(01):42.
[5]蒋涛,薛海鹏,戴庆云,等.低扬程泵站拍门水压消能关键技术研究与应用[J].江苏水利,2023,(01):62.
　JIANG Tao,XUE Haipeng,DAI Qingyun,et al.Key technology research and application of hydraulic energy dissipation in low-lift pumping station flap valve[J].JIANGSU WATER RESOURCES,2023,(01):62.

备注/Memo

备注/Memo:
作者简介：丁辉（1975-），男，本科，工程师，主要从事农村水利工作。
更新日期/Last Update: 2017-01-15