[1]施 伟,冯旭松.补料长度对井筒式出水流道水力性能的影响[J].江苏水利,2019,(08):42-46+50.
　SHI Wei,FENG Xusong.Effect of feeding length on hydraulic performance of wellbore outflow conduit[J].JIANGSU WATER RESOURCES,2019,(08):42-46+50.
点击复制

补料长度对井筒式出水流道水力性能的影响()
分享到：

《江苏水利》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2019年08期
页码:
42-46+50
栏目:
水利规划与设计
出版日期:
2019-08-28

文章信息/Info

Title:
Effect of feeding length on hydraulic performance of wellbore outflow conduit
文章编号:
1007-7839(2019)08-0042-05
作者:
施 伟1; 2;  冯旭松1; 2
1.南水北调东线江苏水源有限责任公司, 江苏 南京 210029; 2.江苏省泵站工程技术研究中心, 江苏 南京 210029
Author(s):
SHI Wei1; 2;  FENG Xusong1; 2
1.Jiangsu water source limited liability Company of South to North Water Transfer East line, Nanjing 210029, Jiangsu; 2.Jiangsu Pump Station Engineering Research Center, Nanjing 210029, Jiangsu
关键词:
井筒式出水流道;  补料长度;  数值模拟;  水力性能
Keywords:
wellbore outflow conduit;  feeding length;  numerical simulation;  hydraulic performance
分类号:
TV675
文献标志码:
B
摘要:
为研究补料长度L对立式潜水轴流泵装置中井筒式出水流道水力性能的影响,设置L=0 mm、L=60 mm及L=120 mm的3种补料长度方案,并基于RNG k-ε模型对泵装置进行定常CFD数值模拟。研究不同补料长度下井筒式出水流道特征断面内部流动特性、水力损失及泵装置扬程效率,结构表明:补料长度越大,出水管内部的流态越平顺、静压分布越均匀,出水流道的水力损失越小,泵装置不同流量下的扬程效率也越高。综合来看,在井筒及出水管的连接段增设一定长度的补料能够有效地平缓出水管进口的流态,但过长的补料区域会带来加工上的不便,不能很好的体现立式潜水轴流泵装置的经济实用性,因此,在实际工程中,应该结合实际成本综合考虑。
Abstract:
In order to study the influence of feeding length L on the hydraulic performance of wellbore outflow conduit in vertical submersible axial flow pump device, three feeding length schemes(L=0 mm, L=60 mm and L=120 mm)were set up, and steady CFD numerical simulation of pump device was carried out based on RNG k-ε model. By studying the flow characteristics, hydraulic loss and pump lift efficiency in the characteristic section of the wellbore outlet channel with different feeding length, it was found that the longer the feeding length was, the smoother the flow pattern in the outlet pipe was, the more uniform the static pressure distribution was, the smaller the hydraulic loss of the outlet channel was, and the higher the lift efficiency of the pump device with different flow rate was. Generally speaking, adding a certain feeding length to the connecting section of wellbore and outlet pipe could effectively smooth the flow pattern of outlet pipe, but too long feeding area would bring processing inconvenience and could not well reflect the economic practicability of vertical submersible axial flow pump device. Therefore, in practical engineering, comprehensive consideration should be given to actual cost.

参考文献/References:

[1] 刘超, 周庆连, 钱均, 等. 双向流道立轴潜水泵系统流动特性研究[J]. 农业机械学报, 2016, 47(10):59-65+58.
[2] 夏臣智, 成立, 蒋红樱, 等. 潜水贯流泵装置过流部件水力性能分析与优化[J]. 农业工程学报, 2018, 34(07):45-51+301.
[3] 杨帆, 金燕, 刘超, 等. 双向潜水贯流泵装置性能试验与数值分析[J]. 农业工程学报, 2012, 28(16):60-67.
[4] 葛强, 陈松山, 王林锁, 等. 潜水轴流泵装置特性模型试验[J]. 水利水电科技进展, 2006, 26(5):34-40.
[5] 蒋文军. 一种提高井筒式潜水轴流泵装置效率的方法[J]. 排灌机械, 1999(01):30.
[6] 张德胜, 施卫东, 张华, 等. 不同湍流模型在轴流泵性能预测中的应用[J]. 农业工程学报, 2012, 28(01):66-71+296.

备注/Memo

备注/Memo:
收稿日期:2019-04-23
基金项目:江苏省水利科技项目(2017031)
作者简介:施伟(1980-),博士,高级工程师,主要从事水利工程建设与管理工作。
更新日期/Last Update: 2019-08-15