[1]施伟,陈松山,倪春,等.南水北调邳州泵站叶片过调原因分析及解决措施[J].江苏水利,2022,(03):26-30.
　SHI Wei,CHEN Songshan**,NI Chun,et al.Analysis on the causes of blade over-adjustment in Pizhou Pumping Station of South-to-North Water Diversion Project and counter?measures[J].JIANGSU WATER RESOURCES,2022,(03):26-30.
点击复制

南水北调邳州泵站叶片过调原因分析及解决措施()
分享到：

《江苏水利》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2022年03期
页码:
26-30
栏目:
水利工程管理及防汛防旱
出版日期:
2022-03-29

文章信息/Info

Title:
Analysis on the causes of blade over-adjustment in Pizhou Pumping Station of South-to-North Water Diversion Project and counter?measures
文章编号:
1007-7839(2022)03-0026-0005
作者:
施伟1; 陈松山2; 倪春1; 于贤磊1; 张建峰3; 李小川2
（1.南水北调东线江苏水源有限责任公司徐州分公司，江苏徐州221200；2.扬州大学电气与能源动力工程学院，江苏扬州225000；3.江苏省江都水利工程管理处，江苏扬州225200）
Author(s):
SHI Wei1; CHEN Songshan2**; NI Chun1; YU Xianlei1; ZHANG Jianfeng3; LI Xiaochuan2
（1.Xuzhou Branch of The Eastern Route of South-to-North Water Diversion Jiangsu Water Resource Co., Ltd., Xuzhou 221200，China；2.College of Electrical, Energy and Power Engineering, Yangzhou University, Yangzhou 225000，China；3.Jiangdu Water Conservancy Project Management Office, Yangzhou 225200，China）
关键词:
泵站; 叶片调节; 液压系统
Keywords:
pumping station;  blade adjustment;  hydraulic system
分类号:
TV675
文献标志码:
B
摘要:
针对南水北调邳州站叶片过调问题，从液压式叶片调节系统的工作原理出发，构建针阀和主配压阀复位运动的数学模型，基于Matlab Simulink仿真，揭示了针阀和主配压阀复位运动规律。研究结果表明，邳州泵站叶片调节系统的针阀和主配压阀复位存在1.4 s左右的时间滞后，此是导致叶片过调的主要原因。结合邳州泵站现状，提出了增加限位调整螺母，预留滞后时间差，适当增大弹簧刚度系数的解决措施，研究成果可为液压式叶调结构优化设计和同类工程问题的解决提供重要参考。
Abstract:
Aiming at the problem of blade over-adjustment in Pizhou Station of the South-to-North Water Diversion Project, according to the working principle of the hydraulic blade adjustment system, mathematical models of the reset movement of the needle valve and the main pressure distribution valve are constructed. Based on Matlab Simulink simulation, the reset motion law of needle valve and main pressure distribution valve is revealed. The results show that there is a time lag of about 1.4s in the reset of the needle valve and the main pressure distributing valve of the vane adjustment system of Pizhou Pumping Station, which is the main reason for the overadjustment of the vane. Combined with the current situation of Pizhou Pumping Station, this paper proposes solutions which is that increase the limit adjustment nut, reserve the lag time difference, and appropriately increase the spring stiffness coefficient. The research results will provide an important reference for the optimization design of the hydraulic blade adjustment structure and the solution of similar problems in similar projects.

参考文献/References:

［1］ 问泽杭，吉庆伟，莫兆祥. 泵站水泵叶片调节系统压力油装置的技术改造［J］. 人民长江，2008（6）：92-93.
［2］ 何伟，林昌杰，等. 一种新型的电-位移转换装置的研制［J］. 液压气动与密封，2007（3）：41-42.
［3］ 李扬，夏方坤，周灿华，等. 大型液压全调节立式轴流泵叶片调节机构故障分析与改造［J］. 中国农村水利水电，2021（6）：1-13.
［4］ 俞鸿飞，刘安平，束炳芳，等. 步进伺服电机式电—位移转换器在水轮机调速器上的应用［J］. 华东电力，2014，42（11）：2466-2470.

相似文献/References:

[1]张少卿,杨 波,张 瑾.常熟水利枢纽清污机的选型设计与研究[J].江苏水利,2016,(03):6.
　ZHANG Shaoqing,YANG Bo,ZHANG Jin.Type selection design and research on cleaning machine of Changshu hydro project[J].JIANGSU WATER RESOURCES,2016,(03):6.
[2]钱睿智,丁昌言,王亚宾,等.单位扬程有功功率法泵站流量关系定线[J].江苏水利,2016,(03):26.
　QIAN Ruizhi,DING Changyan,WANG Yabin,et al.Unit lift active power method for discharge relationship alignment of pump station[J].JIANGSU WATER RESOURCES,2016,(03):26.
[3]沈志新,朱丽向.灌河北泵站达标创建工作的探索[J].江苏水利,2016,(03):46.
　SHEN Zhixin,ZHU Lixiang.Exploration of standardized unit establishment of Guanhe Northern pump station[J].JIANGSU WATER RESOURCES,2016,(03):46.
[4]黄璐,朱文彪,王鼎,等.运东闸站多年降水量特性分析[J].江苏水利,2016,(10):46.
　HUANG Lu,ZHU Wenbiao,WANG Ding,et al.Analysis of precipitation characteristics of Yundong sluice station[J].JIANGSU WATER RESOURCES,2016,(03):46.
[5]薛士平,杨晓红,吴佩锋.泵站弯道引水渠水流流动特性影响分析[J].江苏水利,2017,(01):9.
　XUE Shiping,YANG Xiaohong,WU Peifeng.Analysis of the flow characteristics influence in the bend channel of pump station[J].JIANGSU WATER RESOURCES,2017,(03):9.
[6]王骏秋,万 泉,王 江.基于合并效率法对江都第三抽水站正反出流分析[J].江苏水利,2017,(01):27.
　WANG JunQiu,WAN Quan,WANG Jiang.Analysis of positive and negative flow out Jiangdu No.3 pumping station based on combined efficiency method[J].JIANGSU WATER RESOURCES,2017,(03):27.
[7]顾春雨,薛士平,杨晓红.泵站锥形侧向进水前池水流流动特性分析[J].江苏水利,2017,(02):17.
　GU Chunyu,XUE Shiping,YANG Xiaohong.Analysis of the flow characteristics in the conical forebay wit h side-intake of the pump station[J].JIANGSU WATER RESOURCES,2017,(03):17.
[8]吴晓兰,马晓辉,许一新.泵站正向进水前池水流流动均匀性分析[J].江苏水利,2017,(03):53.
　WU Xiaolan,MA Xiaohui,XU Yixin.Analysis of flow uniformity of front inflow forebay in the pump station[J].JIANGSU WATER RESOURCES,2017,(03):53.
[9]杨卫星,汤仲仁.南通市九圩港提水泵站工程裂缝处理施工工艺[J].江苏水利,2017,(04):18.
　YANG Weixing,TANG Zhongren.The construction process of concrete crack treatment in Jiuweigang pump station[J].JIANGSU WATER RESOURCES,2017,(03):18.
[10]吴 钢,孟慧玲,王嘉豪.江尖水利枢纽泵站静音改造的实践与思考[J].江苏水利,2017,(04):58.
　WU Gang,MENG Huiling,WANG Jiahao.Practice and Reflection on the reform of Jiangjian pump station[J].JIANGSU WATER RESOURCES,2017,(03):58.

备注/Memo

备注/Memo:
收稿日期：2021-10-10
作者简介：施伟（1980—），男，正高级工程师，博士，主要从事水利工程建设与管理工作。E-mail：nsbdsw@126..com
通信作者：陈松山（1968—），男，教授，博士，主要从事大型泵站水力优化设计与试验研究。E-mail：yzcss08@yzu.edu.cn
更新日期/Last Update: 2022-03-24