[1]王丽,施伟,刘连建,等.导叶角度对轴流泵高效区运行范围的影响[J].江苏水利,2023,(05):17-20,29.
 WANG Li,SHI Wei,LIU Lianjian,et al.Influence of the angle of the guide vane on the operating range of the high efficiency zone of the axial flow pump[J].JIANGSU WATER RESOURCES,2023,(05):17-20,29.
点击复制

导叶角度对轴流泵高效区运行范围的影响()
分享到:

《江苏水利》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2023年05期
页码:
17-20,29
栏目:
水利规划与设计
出版日期:
2023-05-30

文章信息/Info

Title:
Influence of the angle of the guide vane on the operating range of the high efficiency zone of the axial flow pump
文章编号:
1007-7839(2023)05-0017-0004
作者:
王丽1施伟2刘连建1郭瑞1沈媛媛3石丽建4
(1. 淮安市水利勘测设计研究院有限公司,江苏 淮安 223001;2. 南水北调东线江苏水源有限责任公司,江苏 南京 210000;3. 淮安市防汛物资管理中心,江苏 淮安 223001;4. 扬州大学 水利科学与工程学院,江苏 扬州 225009)
Author(s):
WANG Li1 SHI Wei2 LIU Lianjian1 GUO Rui1 SHEN Yuanyuan3 SHI Lijian4
(1. Huai’an Surveying and Design Institute of Water Resources Co., Ltd., Huai’an 223001, China;2. The Eastern Route of South-to-North Water Diversion Jiangsu Water Resource Co., Ltd., Nanjing 210000, China;3. Huai’an Flood Control Materials Management Center, Huai’an 223001, China;4. College of Hydraulic Science and Engineering, Yangzhou University, Yangzhou 225009, China)
关键词:
轴流泵导叶角度高效区数值模拟模型试验
Keywords:
axial flow pump guide vane angle high efficiency zone numerical simulation model test
分类号:
TV675
文献标志码:
B
摘要:
为了研究导叶角度对轴流泵高效区运行范围的影响,采用CFD和模型试验对不同导叶角度下轴流泵水力性能进行数值模拟计算,并且进行内流场比较分析。结果表明,通过改变导叶角度后,优化导叶在设计和大流量工况下的内部流场更加均匀合理,导叶优化后的轴流泵最高效率为87.53%,与初始导叶方案相比,配优化导叶的轴流泵高效区运行范围扩宽了近1.36倍 。最后通过模型试验对比分析,验证了数值计算的可靠性。研究结果可为提高轴流泵高效区的运行范围提供参考。
Abstract:
In order to study the influence of the angle of the guide vane on the operating range of the high efficiency zone of an axial flow pump, CFD and model test are used to carry out numerical simulation calculations of an axial flow pump with different guide vane angles and to carry out a comparative analysis of the internal flow field. The results show that after changing the angle of the guide vane, the internal flow field of the optimized guide vane is more uniform and reasonable under the design and high flow conditions, and the maximum efficiency of the axial flow pump after the optimization of the guide vane is 87.53%. Compared to the initial guide vane solution, the operating range of the axial flow pump with optimized guide vane is extended by nearly 1.36 times in the high efficiency zone. Finally, the reliability is verified by model test comparison. The research results can provide a reference for improving the operating range of high efficiency areas of axial flow pumps.

参考文献/References:

[1]罗欣,郑源,冯俊. 基于CFD的轴流泵后置导叶水力性能分析[J]. 水电能源科学,2014,32(3):188-191.
[2]朱国俊,冯建军,戈振国,等. 后置导叶对潮汐双向贯流式机组性能的影响[J]. 水力发电学报,2021,40(6):12-20.
[3]任向轩,汤方平,石丽建,等. 导叶叶片数对轴流泵水力性能的影响[J]. 中国农村水利水电,2020(9):75-79,83.
[4]石丽建,汤方平,周捍珑,等. 不同导叶叶片掠角下轴流泵段水力特性分析及试验[J]. 农业工程学报,2015,31(14):90-95.
[5]孙奥冉,郑源,杨春霞. 基于CFD的导叶进口角对轴流泵水力性能的影响[J]. 水电能源科学,2017,35(3):170-173,63.

相似文献/References:

[1]孙丹丹,高 慧,王 刚,等.立式轴流泵装置进出水流道多方案优选[J].江苏水利,2018,(11):35.
 SUN Dandan,GAO Hui,WANG Gang,et al.Multiple schemes optimization for inlet and outlet flow of vertical axial flow pump device[J].JIANGSU WATER RESOURCES,2018,(05):35.
[2]李太民,王业宇,吉庆伟,等.大型立式轴流泵变频反向发电压力脉动特性分析[J].江苏水利,2019,(07):69.
 LI Taimin,WANG Yeyu,JI Qingwei,et al.Analysis on the pressure pulsation characteristics of large-scale vertical axial flow pump with rotation frequency inverted power generation[J].JIANGSU WATER RESOURCES,2019,(05):69.
[3]朱晓明,张东培,周 斌,等.大型立式轴流泵进水流道两点压差式测流法研究[J].江苏水利,2019,(10):23.
 ZHU Xiaoming,ZHANG Dongpei,ZHOU Bin,et al.Study on the two-point differential pressure type flow measurement method for inlet flow channel of large vertical axial flow pum[J].JIANGSU WATER RESOURCES,2019,(05):23.
[4]张庆宏,施卫东,谢占山,等.不同出水口淹没深度的轴流泵性能及内部湍流特征[J].江苏水利,2021,(09):1.
 ZHANG Qinghong,SHI Weidong,XIE Zhanshan,et al.Performance and internal turbulence characteristics of axial flow pump with different outlet submerged depth[J].JIANGSU WATER RESOURCES,2021,(05):1.
[5]李松柏,孙涛,成立,等.大型立式轴流泵站典型故障调查分析[J].江苏水利,2022,(03):36.
 LI Songbai,SUN Tao,CHENG Li*,et al.Investigation and analysis on typical faults in large vertical axial flow pumping station[J].JIANGSU WATER RESOURCES,2022,(05):36.
[6]李蕴升,庄伟栋,汤国庆,等.某大型轴流泵叶片角度测量显示装置技术改造探讨[J].江苏水利,2024,(05):52.
 LI Yunsheng,ZHUANG Weidong,TANG Guoqing,et al.Discussion on technology transformation of blade angle measurement display device for a large axial flow pump[J].JIANGSU WATER RESOURCES,2024,(05):52.
[7]范云逸,周鹏,陈岗,等.基于能量损失模型的轴流泵空化特性研究[J].江苏水利,2024,(08):26.
 FAN Yunyi,ZHOU Peng,CHEN Gang,et al.Study on cavitation characteristics of axial flow pump based on energy loss model[J].JIANGSU WATER RESOURCES,2024,(05):26.

备注/Memo

备注/Memo:
收稿日期:2023-03-13
基金项目:江苏省水利科技项目(2021012);江苏省南水北调科技研发项目(JSNSBD202201);扬州市科技计划项目市校合作专项(YZ2022178)
作者简介:王丽(1981—),女,高级工程师,主要从事水利工程设计工作。E-mail: 50442537@qq.com
通信作者:石丽建(1989—),男,副教授,博士,主要从事水泵及水泵站相关研究工作。E-mail: shilijian@yzu.edu.cn
更新日期/Last Update: 2023-05-30