[1]朱晓明,张东培,周 斌,等.大型立式轴流泵进水流道两点压差式测流法研究[J].江苏水利,2019,(10):23-28+33.
　ZHU Xiaoming,ZHANG Dongpei,ZHOU Bin,et al.Study on the two-point differential pressure type flow measurement method for inlet flow channel of large vertical axial flow pum[J].JIANGSU WATER RESOURCES,2019,(10):23-28+33.
点击复制

大型立式轴流泵进水流道两点压差式测流法研究()
分享到：

《江苏水利》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2019年10期
页码:
23-28+33
栏目:
水利工程建设
出版日期:
2019-11-02

文章信息/Info

Title:
Study on the two-point differential pressure type flow measurement method for inlet flow channel of large vertical axial flow pum
文章编号:
1007-7839(2019)10-0023-06
作者:
朱晓明1;  张东培2;  周 斌3;  田志刚2; 刘苏南4
1.河海大学, 江苏 南京 210098; 2.扬州市城市防洪工程管理处, 江苏 扬州 225003; 3.扬州市水利工程质量安全监督站, 江苏 扬州 225001; 4.扬州市瓜洲泵站工程管理处, 江苏 扬州 225001
Author(s):
ZHU Xiaoming1;  ZHANG Dongpei2;  ZHOU Bin3;  TIAN Zhigang2;  LIU Sunan4
1.Hohai University, Nanjing 210098, Jiangsu; 2.Yangzhou City Flood Control Project Management Office, Yangzhou 225003, Jiangsu; 3.Yangzhou City Water Conservancy Engineering Quality and Safety Supervision Station, Yangzhou 225001, Jiangsu; 4.Yangzhou Guazhou Pumping Station Project Management Office, Yangzhou 225003, Jiangsu
关键词:
轴流泵;  测流法;  压差式;  数值模拟;  进水流道
Keywords:
axial flow pump;  flow measurement method;  differential pressure type;  numerical simulation;  inlet flow channel
分类号:
TV675
文献标志码:
B
摘要:
水泵流量是确定泵站装置效率和能源单耗的关键参数,研究大型立式轴流泵进水流道两点压差式测流法具有非常重要的意义。应用基于Standard k-ε、RNG k-ε 和 Realizable k-ε湍流模型的RANS方法分别对肘形进水流道的水流流动进行数值模拟,研究了不同湍流模型在数值计算中对壁面压强的预测能力,并与物理模型试验数据进行对比,结果表明Realizable k-ε湍流模型所预测的进水流道压差与试验结果最为接近。对肘形进水流道模型在不同的流量条件下进行数值模拟,分析了壁面的压强分布规律并确定了测压点的具体位置。在肘形进水流道原型的数值计算中,采用了与模型数值计算相同的数值方法,同时引入大并行的云计算技术,预测了大型立式轴流泵现场实测流量与压差的函数关系。
Abstract:
The pump flow rate is the key parameter to determine the efficiency of the pumping station and the unit consumption of energy.It is very important to study the two-point differential pressure type flow measurement method for the inlet flow of large vertical axial flow pump.The RANS method based on Standard k-ε, RNG k-εand Realizable k-εturbulence model was used to numerically simulate the flow of the elbow inlet flow channel, and the prediction ability of different turbulence models in wall numerical calculation was studied and compared with physical model test data.The results showed that the pressure difference of the inlet flow channel predicted by the Realizable k-εturbulence model was the closest to the experimental results.The elbow-shaped inlet channel model was simulated numerically under different flow conditions.The pressure distribution on the wall surface was analyzed and the specific position of the pressure measuring point was determined.In the numerical calculation of the prototype of elbow-shaped inlet passage, the same numerical method as the model numerical calculation was adopted, and the large parallel cloud computing technology was introduced to predict the functional relationship between the measured flow rate and pressure difference in the field of large vertical axial flow pump.

参考文献/References:

[1] 冯卫民, 于永海.水泵及水泵站(第五版)[M].北京:水利水电出版社, 2016.
[2] 仇宝云, 冯晓莉, 朱庆元, 等.大型泵站能量特性现场测试研究[J].排灌机械工程学报, 2011, 29(04):322-327.
[3] 严登丰.推荐采用绕流管法测定泵站流量[J].南水北调与水利科技, 2011, 9(02):140-142.
[4] 郑源, 赵宗引, 须伦根.低扬程大流量泵站单机流量测量[J].南水北调与水利科技, 2006(05):14-16+19.
[5] 周济人, 杨华, 成立, 等.超声波流量计测试大型低扬程泵站流量的模型试验[J].排灌机械, 2009, 27(01):51-54.
[6] 李建威.水力机械测试技术[M].北京:机械工业出版社, 1981.
[7] Kan K, Zheng Y, Chen Y, et al.Numerical study on the internal flow characteristics of an axial-flow pump under stall conditions[J].Journal of Mechanical Science and Technology, 2018, 32(10):4683-4695.
[8] Zhou D, Chen H, Zhang L.Investigation of pumped storage hydropower power-off transient process using3D numerical simulation based on SP-VOF hybrid model[J].Energies, 2018, 11(4):1020.
[9] Lauder B E, Spalding D B.Lectures in mathematical models of turbulence[J].London:AP, 1972.
[10] Smith L M, Woodruff S L.Renormalization-group analysis of turbulence[J].Annual review of fluid mechanics, 1998, 30(1):275-310.
[11] Shih T H, Liou W W, Shabbir A, et al.A new k-ε eddy viscosity model for high reynolds number turbulent flows[J].Computers & Fluids, 1995, 24(3):227-238.
[12] 王福军.计算流体动力学分析:CFD 软件原理与应用[M].北京:清华大学出版社有限公司, 2004.

相似文献/References:

[1]孙丹丹,高 慧,王 刚,等.立式轴流泵装置进出水流道多方案优选[J].江苏水利,2018,(11):35.
　SUN Dandan,GAO Hui,WANG Gang,et al.Multiple schemes optimization for inlet and outlet flow of vertical axial flow pump device[J].JIANGSU WATER RESOURCES,2018,(10):35.
[2]李太民,王业宇,吉庆伟,等.大型立式轴流泵变频反向发电压力脉动特性分析[J].江苏水利,2019,(07):69.
　LI Taimin,WANG Yeyu,JI Qingwei,et al.Analysis on the pressure pulsation characteristics of large-scale vertical axial flow pump with rotation frequency inverted power generation[J].JIANGSU WATER RESOURCES,2019,(10):69.
[3]张庆宏,施卫东,谢占山,等.不同出水口淹没深度的轴流泵性能及内部湍流特征[J].江苏水利,2021,(09):1.
　ZHANG Qinghong,SHI Weidong,XIE Zhanshan,et al.Performance and internal turbulence characteristics of axial flow pump with different outlet submerged depth[J].JIANGSU WATER RESOURCES,2021,(10):1.
[4]李松柏,孙涛,成立,等.大型立式轴流泵站典型故障调查分析[J].江苏水利,2022,(03):36.
　LI Songbai,SUN Tao,CHENG Li*,et al.Investigation and analysis on typical faults in large vertical axial flow pumping station[J].JIANGSU WATER RESOURCES,2022,(10):36.
[5]王丽,施伟,刘连建,等.导叶角度对轴流泵高效区运行范围的影响[J].江苏水利,2023,(05):17.
　WANG Li,SHI Wei,LIU Lianjian,et al.Influence of the angle of the guide vane on the operating range of the high efficiency zone of the axial flow pump[J].JIANGSU WATER RESOURCES,2023,(10):17.
[6]李蕴升,庄伟栋,汤国庆,等.某大型轴流泵叶片角度测量显示装置技术改造探讨[J].江苏水利,2024,(05):52.
　LI Yunsheng,ZHUANG Weidong,TANG Guoqing,et al.Discussion on technology transformation of blade angle measurement display device for a large axial flow pump[J].JIANGSU WATER RESOURCES,2024,(10):52.
[7]范云逸,周鹏,陈岗,等.基于能量损失模型的轴流泵空化特性研究[J].江苏水利,2024,(08):26.
　FAN Yunyi,ZHOU Peng,CHEN Gang,et al.Study on cavitation characteristics of axial flow pump based on energy loss model[J].JIANGSU WATER RESOURCES,2024,(10):26.

备注/Memo

备注/Memo:
收稿日期:2019-04-21 作者简介:朱晓明(1989—),男,博士研究生,研究方向为泵站工程水力学。
更新日期/Last Update: 2019-11-15